FORMS OF PACKING
EXAMPLE OF PACKAGING
- ANY MEASURE (OPTIONAL)
- Measurements:
- Depth formed:
- Output per hour:
- ANY MEASURE (OPTIONAL)
- Aspirator option retales
- Waste disposal real
GENERAL CHARACTERISTICS
- touch screen 10 “rotating colored
- 39 programs for various products to be packaged
- Endless alarms incidents
- Output connections for printers, dispensers, etc.
- Chains and start normal, light and very soft for liquids
- Advances x1 x2 x3 x4 parties and asymmetric
- Anti-condensation resistance switchboard
- Counter good containers sight
- negative counter packaging bad sight
- Minute speed cycles sight
- Menu screen for user
- Screen menu to maintainer
- 70 strings advance with different speeds
- Selecting the number of progress for each pulse gear
- Break detector retales
- Vacuum test
- Button for manual input of bottom film pulsed or continuous
- Final cycle forward or container
- General and cable identification switch according to CE standards
- Nickeled chains with tweezers and stainless steel springs to lower film
- No drag chains for top film
- Chain drive servo-motor for high performance
- maximum diameter of upper coil 350 mm (standard)
- Diameter lower coil 400 mm (standard)
- Reel holder adapted mandrel 76 mm 3 “
- Reel holder upper and lower motor
- Carrying upper and lower coils with lateral adjustment
- Direct vacuum in the package by cannulas
- Millibars vacuum, and intermittent time to progression
- Detector end of upper and lower film
- Cleaning program lasts closure
- active welding cylinder air pressure + vacuum
- Edge welding is not heat the product
- Open-easy on the containers in place to be determined
- Marco – grill easy change welding inside drawer
- Containers output ramp height adjustable rollers
- Separate ventilation and regulated vacuum lasts formed
- Retales evacuation by moto-drums
- Cleaner remnants stuck in the chain return
- Chocks of different heights formed in the containers
- cross-section
- slitting
- Thermoforming by compressed air pressure
- Ease in mold changes
- Cargo area with support for light packaging
- robust stainless steel chassis with sanitary hygienic design
- side doors for easy maintenance access
- Leveling feet and height of the machine
- Cooling water circuit
- Circuit water drain valve for mold change
- Calderín tank with compressed air reservoir
- Lifting levers actuated by lasts for cylinder
- Design for quick and easy maintenance
- General Ip65 watertight box divided into two, electronic and pneumatic
- Safety protections according to CE standards.
- Security guards in stainless steel and methacrylate
- maximum height of 120 mm standard thermoforming
- Filter impurities before electrovalves
- anti-knock damper for high speeds lasts
- purifying filter compressed air formed
- Silencers compressed air noise
- Closing adjustment lasts for regulators
OPTIONAL FEATURES
- Remote control via internet
- Tape output motorized adjustable height with / without wheel
- Thermoforming by (explosion), (empty) or (+ vacuum pressure)
- Auto greasing blow
- Decanter liquid before pumps
- Ability to various advances on the same machine
- Water Cooler 2.1 kW or 4.5 kW
- Adjustment * 150 mm mandrel 6 “
- Hinges for Swivel Pads
- Void by injection cannulas
- Severable chassis modules
- Bancada for external pump
TECHNICAL CHARACTERISTICS
- Overall width approximately 930mm
- Total length depends on advances and loading areas
- Total height from 1700 to 1800mm adjustable legs
- Total weight 1400 kg approx. It depends on equipment
- Loading zones to choose the number of cycles
- Electrical connection (5 pin) – (3 phase + n + t)
- Electric Power max. depending on equipment
- Vacuum pump volume in m³ / hour
- Width of top film according model
- Width less film as model
- Advance film as model
